An attractive combination of 48 x 10kg packs of high density and hot burning Pini Kay wood briquettes made of compressed clean virgin sawdust, stacked on 100 x 120cm pallet, and 24 x 35L / 13kg nets of long lasting kiln dried Oak logs on top.
The combination gives the advantages of high heat and long burn time of compressed briquettes and natural flame and look of Oak logs.
Pini Kay® wood briquettes are made from Pine (70%) and Spruce (30%) sawdust (sawmill byproducts) mix with no additives. They burn for approx. 0.5 hour and then glowed while releasing heat for 2.5 hours, for a total heat release time of 3 hours. Lowest moisture (4-5% or less) and highest heat value 5.1kWh/kg make these briquettes a great choice. Each briquette measures approximately 63mm x 63mm x 230mm (approx.2.5 x 2.5 x 10 in.) with a hole down the middle 24mm (1 in.) in diameter which creates additional draught and ensures the briquettes burn both inside and outside. Each 10kg pack of 12 logs is wrapped in plastic film with a binder tape. Suitable for modern log burners, wood stoves with adjustable air inflow, woodburning cookers, barbecues, chimeneas. Results in open fireplaces will depend on air inflow. More details about Pini-Kay briquettes can be found here.
Oak kiln-dried logs are 25cm in length and Extra Dry - some logs 5% or less, all logs below 20%. Heating value is approx. 5.35kWh/kg. Oak is generally considered as one of the very best wood fuel logs. It burns fairly slowly with nice flames and produces an excellent long lasting heat even when only the embers are left. More details about Oak Kiln-Dried logs can be found here.