An attractive combination of 48 x 10kg packs of high density and hottest burn Pini Kay briquettes made of compressed clean virgin sawdust , stacked on 80x120cm pallet, and 24 x 40L/15kg nets of quick lighting kiln dried Birch logs on the top.
The combination gives the advantages of good value and long burn time of compressed briquettes and natural flame and look of Birch logs.
Pini Kay® wood briquettes are made from Pine (70%) and Spruce (30%) sawdust (sawmill byproducts) mix with no additives. They burn for approx. 0.5 hour and then glowed while releasing heat for 2.5 hours, for a total heat release time of 3 hours. Lowest moisture (4-5% or less) and highest heat value 5.1kWh/kg make these briquettes a great choice. Each briquette measures approximately 63mm x 63mm x 230mm (approx.2.5 x 2.5 x 10 in.) with a hole down the middle 24mm (1 in.) in diameter which creates additional draught and ensures the briquettes burn both inside and outside. Each 10kg pack of 12 logs is wrapped in plastic film with a binder tape. Suitable for modern log burners, wood stoves with adjustable air inflow, woodburning cookers, barbecues, chimeneas. Results in open fireplaces will depend on air inflow. More details about Pini Kay briquettes can be found here.
Birch kiln-dried logs are 25cm in length and have less than 20% moisture. Heating value is approx. 5.15kWh/kg. The logs are perfect for all modern wood appliances, where the air inflow can be adjusted to achieve desired length of burn. They are easy to light and burn with bright lively flames and a pleasing smell. More details about Birch Kiln-Dried logs can be found here.